We – EPG Team the largest agricultural gearbox and pto manufacturing unit in China with 5 diverse branches. For more information: Cell/whatsapp/telegram/Kakao us at: 0086-13083988828

Slip clutch kind on the rotary tiller, yet again slight oozing of grease on the UJ, do not grease the clutch these run dry and need to be “slipped” at minimum once a 12 months to stop rusting with each other Close up of two yokes with the universal joint. Be aware the slight oozing of grease from the UJ seal ends, the clump of grease is from inside of the yoke splined shaft area –Travel (outer) yoke has a woman (normal spline) gap and “Y” form end that is the common joint (UJ) mount. –UJ is a cross shaped casting getting roller bearings enclosed with caps at all four points and is held into the yoke with four “C” clips –Interior yoke and drive shaft is an additional yoke welded to the drive end, of the generate shaft. –Driven shaft and internal yoke is the driven shaft that rides inside of of the generate shaft and has a yoke welded at the pushed conclude –UJ yet another UJ as earlier mentioned 1 1/eight six spline pto shaft Below ram 2500 front drive shaft the pto submit gap digger advice metal generate shaft of chelsea pto shaft managerial john deere mx10 pto shaft sense broken pto shaft of new holland 489 haybine pto shaft “Serving tractor pto shaft coupler agriculture, truck pto drive shaft scoring a good results via top quality of goods and honesty in enterprise”, our goods have been trustworthy by consumers and have obtained a larger share of industry. EPG specializing in the manufacture of rotocultivator ploughshares and other non-standardized farm equipment slicing instruments.

Backyard garden Tools 3 Stage Flail Mower Lawn Mower For Tractor

Flail mower give an effective resolution for the control of abnormal expansion. PTO flail mower, also acknowledged as mulching mowers, are created to mow and shred concurrently. The shredded materiall acts as an effective mulch, to retard ensuing development although providing a medium that will far better release vitamins and minerals into the soil.

Raise Duty Flail Mower
Model	EF85	EF95	EF105	EF115	EF125	EF135	EF145	EF155	EF165	EF175
Structure weight(kg)	a hundred	a hundred and fifteen	one hundred thirty	145	160	a hundred seventy five	190	210	235	255
Slicing width(mm)	829	929	1029	1129	1229	1329	1429	1529	1629	1729
PTO speed	540r/min
Flail kind	Y blade / Hammer
Variety of flails	30	30	36	42	42	forty eight	54	54	54	sixty
Tractor HP	fourteen-18	16-20	20-30	twenty-thirty	twenty five-35	25-35	twenty five-35	30-40	30-40	30-40

 

Middle Duty Flail Mower
Design	EFG105	EFG115	EFG125	EFG135	EFG145	EFG155	EFG165	EFG175
Composition bodyweight(kg)	230	245	257	272	287	302	317	329
Chopping width(mm)	1020	1120	1220	1320	1420	1520	1620	1720
PTO pace	540r/min
Flail type	Y blade / Hammer
Quantity of flails	Y blade:32 Hammer:sixteen	Y blade:forty Hammer:20	Y balde:forty Hammer:twenty	Y blade:forty eight Hammer:24	Y balde:48 Hammer:24	Y blade:48 Hammer:24	Y blade:fifty six Hammer:28	Y balde:fifty six Hammer:28
Tractor HP	fifteen-20	15-twenty	15-20	eighteen-25	20-thirty	20-thirty	twenty five-35	thirty-35

 

Middle Duty Flail Mower
Model	EFGC105	EFGC115	EFGC125	EFGC135	EFGC145	EFGC155	EFGC165	EFGC175	EFGC185
Structure weight(kg)	250	265	277	292	317	322	347	359	385
Slicing width(mm)	1020	1120	1220	1320	1420	1520	1620	1720	1820
PTO pace	540r/min
Flail variety	Y blade / Hammer
Variety of flails	Y blade:32 Hammer:sixteen	Y balde:40 Hammer:twenty	Y balde:40 Hammer:20	Y balde:48 Hammer:24	Y blade:48 Hammer:24	Y blade:forty eight Hammer:24	Y blade:56 Hammer:28	Y blade:fifty six Hammer:28	Y blade:64 Hammer:32
Tractor HP	18-25	eighteen-twenty five	18-25	20-30	twenty-thirty	thirty-forty	35-forty five	forty-fifty	45-eighty five

 

Large Duty Flail Mower
Model	EFGCH105	EFGCH115	EFGCH125	EFGCH135	EFGCH145	EFGCH155	EFGCH165	EFGCH175	EFGCH185
Composition weight(kg)	285	three hundred	312	327	352	332	347	359	385
Slicing width(mm)	1020	1120	1220	1320	1420	1520	1620	1720	1820
PTO pace	540r/min
Flail type	Y blade / Hammer
Number of flails	Y blade:32 Hammer:16	Y balde:40 Hammer:20	Y balde:forty Hammer:twenty	Y balde:forty eight Hammer:24	Y blade:48 Hammer:24	Y blade:forty eight Hammer:24	Y blade:56 Hammer:28	Y blade:fifty six Hammer:28	Y blade:64 Hammer:32
Tractor HP	eighteen-28	18-28	20-28	twenty five-35	twenty five-35	thirty-forty	35-55	35-fifty five	35-55

 

Center Obligation Bush Cutter
Product	AG140	AG170	AG200	AG220
Structure excess weight(kg)	320	390	430	480
Reducing width(mm)	1380	1680	1980	2180
PTO pace	540r/min
Flail type	Hammer
Number of flails	twelve	19	18	20
Tractor HP	35-forty five	40-50	forty five-60	55-85

 

Weighty Duty Bush Cutter
Design	AGF140	AGF160	AGF180	AGF200	AGF220
Dimension(mm)	1800x2225x1020	2000x2225x1020	2200x2225x1020	2400x2225x1020	2600x2225x1020
Composition fat(kg)	598	612	658	698	738
Chopping width(mm)	1400	1600	1800	2000	2200
PTO speed	540r/min
PTO spline	6x8x1600mm
Tractor HP	40-85	50-85	fifty five-90	fifty five-90	50-ninety

 

Heavy Obligation Bush Cutter
Product	AGFK140	AGFK160	AGFK180	AGFK200	AGFK220
Reducing width(mm)	1400	1600	1800	2000	2200
Attain angle up	90°
Get to angle down	55°
PTO	540r/min
Tractor HP	30-forty	forty-60	fifty-70	sixty-90

 

Light Duty Bush Cutter
Model	AGL120	AGL145	AGL165
Construction weight(kg)	250	280	315
Tilt-up angle	90°
Tilt-down angle	55°
Slicing width(mm)	1200	1400	1600
Flail kind	Y blade / Hammer
Variety of flails	Hammer:20/Y blade:forty	Hammer:24/Y blade:48	Hammer:28
PTO pace	540r/min
Tractor	twenty-forty	30-forty five	forty-50

 

Heavy Obligation Flail Mower
Model	AGH140	AGH160	AGH180	AGH200
Dimensions(LxWxH)	1800x1850x1020mm	1820x2050x1020mm	1800x2250x1020mm	1820x2450x1020mm
Composition fat(kg)	564	590	618	648
Slicing width(mm)	1400	1600	1800	2000
Working efficiency	6000-160000m²/h
PTO velocity	540r/min
PTO spline	6x8x1600mm
Tractor HP	forty-eighty five	fifty-ninety	60-90	sixty five-one hundred

 

ATV Ending Mower
Product	ATFM120	ATFM150
Operating width(mm)	1200	1500
Structure excess weight(kg)	210	250
PTO speed	540r/min
No. of blades	six	six
Electrical start off	Yes	Indeed
Motor HP	16HP (LONCIN)

 

Finishing Mower
Model	FMH120	FMH150	FMH180
Chopping width(mm)	1200	1500	1800
Oil movement	30L/min
Motor	30cc
Functioning strain	20Mpa
Blade No.	3pcs
Excess weight(kg)	242	271	295

 

Flail Collector
Design	FCN120	FCN160
Stucture fat(kg)	323	367
Functioning width(mm)	1150	1550
Ability	.55m³	.7m³
PTO velocity	540r/min
Flail kind	Y blade
No. of flails	56	72
Tractor HP	20-40	28-50

 

Large Responsibility Flail Mower
Product	KDK170	KDK180	KDK190	KDK200	KDK210	KDK220	KDK240
Dimension(mm)	1700x915x580	1800x915x580	1900x915x580	2000x915x580	2100x915x580	2200x915x580	2280x915x580
Framework fat(kg)	450	470	490	510	525	540	560
Slicing width(mm)	1700	1800	1900	2000	2100	2200	2400
No. of hammers	28	28	28	32	32	38	38
PTO pace	540r/min
PTO spline	6x8x1600mm
Tractor HP	forty five-sixty five	fifty five-90	sixty-ninety	70-100	70-one hundred	80-a hundred and twenty	eighty-a hundred and twenty

 

Best Mower
Product	TM110	TM140	TM160	TM170
Framework weight(kg)	a hundred seventy five	205	215	225
Reducing bodyweight(mm)	1060	1360	1560	1660
Gear Box	40hp
PTO pace	540r/min
Tractor HP	eighteen-twenty five	twenty-35	twenty five-40	30-fifty

 

Hefty Responsibility Flail Mower
Model	TOL105	TOL115	TOL125	TOL135	TOL145	TOL155	TOL165
Slicing width(mm)	1050	1150	1250	1350	1450	1550	1650
Get to angle up	90°
Achieve angle down	55°
PTO	540r/min
Tractor HP	eighteen-25		25-forty five		35-sixty five

 

Weighty Duty Flail Mower
Model	TOS185	TOS205	TOS225
Slicing width(mm)	1850	2050	2250
Get to angle up	90°
Achieve angle down	55°
PTO	540r/min
Tractor HP	fifty five-85

 

Prime Mower
Product	DS4FT	DS5FT	DS6FT	DS7FT
Dimension(mm)	1320x1220x980	1624x1524x980	1929x1829x980	2234x2134x980
Framework excess weight(kg)	a hundred and seventy	220	240	260
Chopping width(mm)	1180	1484	1789	2094
Working efficiency	3500-9500m²/h	4400-12000m²/h	5300-14000m²/h	6200-16700m²/h
PTO velocity	540r/min
PTO spline	6x8x1000mm
Tractor HP	twenty-35	twenty five-forty	40-70	sixty-100

 

Tractor Trimmer
Product	TS80
Operating width	800mm
Blade	x2
Hydraulic motor	25cc(created-in force limiter)
Oil movement	At the very least 30L/min
Tractor	twenty five-35HP
Packing measurement	1600x950x500mm
Weight	197kg

Q: Are you manufacturing facility or buying and selling company?
A) We are ISO9001 qualified manufacturing facility, largely manufacture in Forestry & Farm Equipment.
B) Employing “Self-developed Self-marketing and advertising” business, minimizing the value of intermediate links.

Q: What’s your company advantages?
A) As the leading maker of forest devices, we have exported to European market for more than 10 several years, common with forest and farm market and can recommend to clientele correct merchandise.
B) We have a variety of goods and can offer you all the devices and tools in the forest and farm. You can get all the things you require. Straightforward and convenient for you.
C) With us your money and your company is risk-free. We can offer you 7-days refund in case of undesirable good quality.
D) Coming together is a commencing maintaining jointly is development doing work collectively is success.

Q: Can we buy a single sample?
Indeed, we require to insert sample fee to the price tag and will return it back again to your following obtaining your large order in foreseeable future.

Q: What is your delivery time?
Right after receiving your payment, we commence to produce your get. It generally takes about 15-45 times depending on the products you buy.

Q: How do you manage your quality?
To ensure substantial high quality and productive administration, we have passed ISO9001 top quality administration method certification. All of our products are a hundred% inspected ahead of shipment. Our total producing processes are beneath a very severe and stringent method in our business.

Q: What is your item guarantee?
The warranty time of the device is 1 calendar year. In the course of this interval, we will ship you the alternative for the broken element(not male made).
To satisfy the every single need of buyer is our aim. We are standing by for any concern of customer. We attempt to make our service fast, successful and happy.

Q: What is actually your company primarily exporting market place?
We largely export to European, North American, Australia, English and Southeast Asia Market place. Since of good quality and provider, we have establish good and long business relations with a lot of clients. Welcome customers from all above the planet to check out our manufacturing unit.
 

The use of original equipment manufacturer’s (OEM) portion numbers or emblems , e.g. CASE® and John Deere® are for reference needs only and for indicating solution use and compatibility. Our organization and the detailed replacement elements contained herein are not sponsored, authorized, or produced by the OEM.